Injection Moulding Setter

Position: Fabricator/ Fitter

Salary: £35100

Working 37.5 hours per week over a 5-day week (Mon- Fri); with core hours being 10:00 to 15:00

Location: Bristol

Type of position: permanent

We are now seeking to recruit a Fabricator Fitter to join workshop based in Bristol. It’s a permanent fabrication/ fitter opportunity that would require the right candidate would be responsible for forming, fabricating, aligning, fitting and assembling steel or aluminium parts, components and equipment, to build bespoke equipment.

Key Responsibilities

Cut, shape, bend, and fabricate steel, stainless steel, and aluminium to precise measurements. Ability to use hand and power tools safely and effectively.Operate fabrication machinery such as guillotines, steel working machines, bandsaws. Assemble and fit metal components using welding, bolting, and riveting techniques, ensuring alignment and accuracy.Responsible for assembling, installing, maintaining, and repairing machinery, pneumatic and mechanical systems, ensuring they function efficiently and safely. Ensure accuracy and quality of finished products by conducting visual inspections, using measuring tools to conduct quality checks and diagnostic tests on finished work, adjusting and modifications where necessary.Conducting routine inspections, diagnosing mechanical issues, repairing or replacing defective components, and performing preventive maintenance to avoid breakdownsWorking to technical drawings

Skills and Experience

Previous experience in a fabrication / fitting or metalworking environment.Ability to read and interpret technical and engineering drawings.Knowledge of fabrication processes and manufacturing techniques.Experience using hand tools, power tools, and fabrication machinery.Strong attention to detail and commitment to quality.Ability to work independently and as part of a team.Good problem-solving and organisational skills.Understanding of health and safety procedures within a workshop environment.Previous fabrication experience.Apprenticeship or NVQ Level 2/3 in Fabrication and Welding, Engineering, or a related discipline.Welding certifications (MIG, TIG, MMA).Forklift, overhead crane, or lifting equipment experience

If you think this is appropriate opportunity, please email your CV to [email protected] or contact Marta on 01453 852 542

Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process.

 

 

Electronic Design Engineer

Tewkesbury

Permanent

£38,000 - £50,000

 

Electronic Design Engineer required by a leading engineering and technology business, based near Tewkesbury to join their growing team.

Working alongside a team of experienced engineers, the successful Electronic Design Engineer will play a key role in the design, development, testing, and manufacture of electronic hardware, with a strong focus on PCB design and layout. Working on a wide variety of projects, from concept through to production.

Main Duties; Electronic Design Engineer

Design, develop, and support electronic circuits and hardware systems for both new and existing products.Create and maintain schematics and PCB layouts using Altium Designer.Select electronic components and manage associated component libraries and footprints.Participate in Design for Manufacture (DFM) and Design for Test (DFT) reviews.Support prototype assembly, board bring-up, testing, and validation activities.Investigate and resolve hardware issues using laboratory equipment including oscilloscopes, multimeters, and power supplies.Produce and maintain technical documentation such as schematics, bills of materials (BOMs), assembly drawings, and test procedures.Liaise with PCB manufacturing and assembly partners to support production activities.Work collaboratively throughout the entire product development lifecycle.Maintain accurate engineering records, revision control, and project documentation.

The ideal candidate will be able to demonstrate the following: Electronic Design Engineer

Experience using Altium Designer for schematic capture and PCB layout.Multi-layer PCB design experience.Understanding of IPC standards and EMC compliance requirements.Experience with circuit simulation tools such as SPICE.Programming or scripting knowledge in Python, C, C#, or similar languages.Familiarity with version control systems such as Git, SVN, or engineering data management platforms.Experience of taking products from concept through to manufacture and ongoing support.

What we are able to offer: Electronic Design Engineer

Tech schemeElectric car schemeMedical insurance

If You are already a Graduate Electronic Engineer, Graduate Electronic Design Engineer, PCB Design Engineer, Electronic Engineer, Electronic Development Engineer You may also be suitable for this role.

Please contact Anna Hinton 01453 829521 [email protected]

 

Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process.

Position: Fabricator

Salary: £37440 to £41600

Working 0700 – 1600 (Monday-Thursday) and 0700 – 1300 (Friday) 40 hour working week

Overtime: available at 1.5x

Location: Caldicot

We are now seeking to recruit a Fabricator to join Fabrication workshop based in Caldicot. It’s a permanent fabrication work that would require the right candidate to se a variety of fabrication techniques, hand tools, and machinery to produce high-quality products while maintaining safe working practices.

Key Responsibilities

Read and interpret engineering drawings, technical specifications, and work instructions.Measure, mark out, cut, bend, and shape metal materials to required dimensions.Assemble fabricated components using welding, bolting, riveting, and other fastening methods.Operate fabrication equipment including guillotines, presses, drills, grinders, saws, and bending machines.Carry out MIG, TIG, or MMA welding where required.Inspect completed work to ensure compliance with quality standards and customer specifications.Use measuring equipment such as tape measures, micrometres, verniers, and gauges.Perform finishing operations including grinding, deburring, and polishing.Maintain a clean and safe working environment in accordance with health and safety requirements.Report material shortages, equipment faults, and quality issues to supervisors.Work collaboratively with welders, engineers, and production teams to meet production deadlines.

Skills and Experience

Previous experience in a fabrication or metalworking environment.Ability to read and interpret technical and engineering drawings.Knowledge of fabrication processes and manufacturing techniques.Experience using hand tools, power tools, and fabrication machinery.Strong attention to detail and commitment to quality.Ability to work independently and as part of a team.Good problem-solving and organisational skills.Understanding of health and safety procedures within a workshop environment.Previous fabrication experience.Apprenticeship or NVQ Level 2/3 in Fabrication and Welding, Engineering, or a related discipline.Welding certifications (MIG, TIG, MMA).Forklift, overhead crane, or lifting equipment experience

If you think this is appropriate opportunity, please email your CV to [email protected] or contact Marta on 01453 852 542

Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process.

Mechanical Workshop Technician

Surrey/West Sussex

Aerospace & Aviation

Permanent

£40,000 - £45,000 (Skills dependent)

 

Hours of Work:

Mon - Thurs: 8.30am – 5.00pm

Friday: 8.30am – 4.00pm

 

The Role - Mechanical Workshop Technician

This is an excellent opportunity for an experienced Mechanical biased Technician to join a fascinating aviation MRO business.

You will be supporting the precision assembly, repair, overhaul, and testing of integrated aircraft mechanical assemblies and systems.

This is a hands-on role that requires an engineer’s problem solving due to the nature of some of the systems and assemblies, as every day will present new technical challenges.

This role would suit someone who enjoys problem solving on mechanically biased systems or mechanical restoration projects (Classic cars, Aircraft, Classic bikes) such as mechanics or aircraft technicians.

 

Duties - Mechanical Workshop Technician

Disassemble aircraft mechanical assemblies to assess condition, wear, and serviceability.Perform precision mechanical repairs and reassembly.Support “Reduce to Produce” activities to maximise component recovery.Interpret and apply Component Maintenance Manuals and Repair Instructions.Select appropriate materials, consumables, and repair methods in line with aviation standards.Bring assemblies and components back to an overhauled standard.

 

Background - Mechanical Workshop Technician

Precision mechanical assembly, repair, or overhaul.Knowledge of engines, gearboxes, transmission systems build (Desirable)Strong attention to detail and commitment to high workmanshipExposure to hydraulic assembly and testing.Strong problem-solving skillsCapable of creating work procedures in the absence of existing SOP’s

Omega

For more information about this role, please contact Lee Powell on 01453 829530 or send a copy of your CV to [email protected]

Candidates who are currently a Aircraft Fitter, Aircraft Technician, Mechanical Fitter, Hydraulic Fitter, Fitter/Tester or Mechanical Technician, mechanic, Restoration mechanic, Classic Car Technician, MRO Technician, Engine Assembler or similar.

For details of other opportunities available within your chosen field please visit our website www.omegaresource.co.uk

Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process.