Trainee Toolmaker

Health & Safety Lead£40,000 - £50,000   Ellesmere PortOur client are specialist manufacture that provide products into a range of agricultural and residential industries. They are seeking a Health & Safety Lead to join their Northwestern Site.Responsibilities & Duties – Health & Safety Lead Ensure a safe workplace environment without risk to health.Develop and deliver a robust Health and Safety Strategy and roll out a clear and concise operational Health and Safety Agenda for all departments.Ensure the completion of regular review of risk assessments for all work equipment and operations.Create a Risk Register ensuring action plans are put into place accordingly.Ensure that Safety Inspections are carried out, Fire Drills and Alarms are correctly reported, Safety Inspections, Risk Assessments are managed, and employees are aware of their responsibilities.Carry out regular Site Inspections / GMP Audits check policies and procedures; practices are being properly implemented and followed.Lead in-house training with managers, supervisors and employees about Health and Safety issues and risks.Accountable for reporting areas that require further development around housekeeping throughout the factory. Issues to be raised with supervisors and employees as appropriate.Communicate and attend / report to the Senior Management Team on key priority issues through the SMT daily meetings.Deliver in-depth Health and Safety Inductions for all new employees.Maintain the company’s system for recording, reporting and investigating injuries, accidents, dangerous occurrences and near misses.Arrange health surveillance when required for employees.Work with regulatory enforcement agencies and government bodies as required.Proactively manage the COSHH and handling hazardous substances for all staff. Essential experience and qualifications – Health & Safety Lead Needs to have a very good understanding of framework for ISO 9001/14001/45001 to conduct quarterly in house internal audits to allow the sites to be ready for audits.NEBOSH qualified.ISO 9001/14001/45001Experience with SEDEX3-5 years’ previous experience successfully managing a H&S function where the workforce is 100+ employees.Understand budget management and able to successfully manage the sites PPE purchasing and safety equipmen Benefits – Health & Safety Lead 25 days annual leave plus bank holidaysCompetitive contributory pension schemeCareer Progression20% of company products For more information on this role, please contact Andrew Haddon on 01453 796617 or send a copy of your CV to [email protected] details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Power Systems Design ManagerLocation: Colchester Permanent £65,000 p/a + company vehicle + company bonus We are currently recruiting for a rapidly expanding renewables energy company that develops, designs, constructs and maintains renewable energy solutions for commercial and private clients. Our client primarily work on ground mount and rooftop solar and batteries.  Role Responsibilities  – Power Systems Design Manager    Undertake and review detailed electrical design & calculations including AC/DC cable sizing, LV AC grading studies, cabinet and connection designPrepare and check Single Line Diagrams (SLDs), electrical drawings, and predesign layouts (containment routing, elevations, etc.)Design, commission and support communication and monitoring systems, including onsite and remote supportSupport G99 and G100 applications, liaising with inverter manufacturers and ensuring complianceProduce Bills of Materials, costings, and Scopes of Works, ensuring technical and commercial alignmentLead and manage the internal design team, driving professional growth and overseeing all design projects with accountability and proactive problem-solving.Implement structured review processes and manage design variations through robust change control while ensuring quality assurance on-site and at final inspections.Coordinate with external subcontractors, suppliers, and manufacturers to maintain high standards, flexible programmes, and compliance with regulations.Provide technical support during construction, assist project management teams, and deliver clear communication to clients and stakeholders for seamless project handover. The ideal candidate for Power Systems Design Manager role would have: Bachelor’s degree (or higher) in Electrical Engineering, Power Systems Engineering, or related discipline; alternatively, HNC/HND in Electrical Engineering with substantial design and management experience18th Edition Wiring Regulations (BS 7671)Proven experience with G99/G100 compliance and UK grid connection requirementsHealth & Safety certification (IOSH Managing Safely, SMSTS) advantageousProficiency in design software (e.g., AutoCAD)Strong technical expertise in electrical engineering within renewable energy (solar PV and batteries preferred)Proven experience in electrical design calculations, monitoring systems, and compliance with UK standards (G99/G100)Excellent leadership and people management skills, with the ability to mentor and develop a design teamStrong commercial awareness and ability to balance technical quality with cost-efficiencyEffective communicator, able to liaise confidently with clients, contractors, suppliers, and internal teamsHighly organised, detail-oriented, and able to manage multiple projects simultaneouslyProblem-solving mindset with a proactive, solution-focused approach For more information on this role, please contact Juls Bujalska on 01453 852541 or send a copy of your CV to [email protected] Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors.Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Job Title: Hydromechanical EngineerLocation: CoventrySalary: CompetitiveContract: PermanentRole Overview – Hydromechanical EngineerJoin our global aerospace client as a Hydromechanical Engineer in their Engineering team. In this pivotal role, you’ll leverage your expertise across all stages of product development, from design through to production, applying mechanical and electrical engineering principles to create innovative, high-quality components for braking systems. Your contributions will drive safety, quality, and innovation, keeping our products at the forefront of the aerospace industry.Key Responsibilities – Hydromechanical Engineer Design, test, maintain, and enhance components and control systems for braking platforms, with a focus on hydromechanical systems and pressure control servo valves.Utilize strong technical expertise to address complex challenges through analysis, experience, and established methods.Develop and oversee project documentation, including Engineering Change Notices for design enhancements, obsolescence, or supplier changes.Produce customer-required documentation for engineering changes, production halts, and limited production processes.Assist production and quality teams with technical inquiries, including drawing specifications, design intent, and analysis of returned components.Establish environmental test objectives to validate design changes, balancing analytical approaches with similarity assessments.Clearly convey technical details to internal and external stakeholders.Apply independent judgment to resolve technical issues effectively. Key Experience – Hydromechanical Engineer Minimum 5 years of engineering experience or 3 years with an advanced engineering degree.Strong proficiency in mechanical engineering, with foundational knowledge of electrical engineering principles.Experience with hydromechanical systems or pressure control servo valve design is highly advantageous.Demonstrated ability to approach problem-solving systematically, analytically, and with discipline.Capability to produce clear, compliant technical documentation for stakeholders.Excellent communication and interpersonal skills to collaborate with internal teams and external partners.Proficiency in Microsoft Office and database tools; experience with Altium, Jira, DOORS, Matlab, LABVIEW, LTSpice, or pSPICE is beneficial.A proactive, results-oriented mindset with a passion for aerospace and adaptability to diverse challenges.Willingness to undertake occasional domestic and international travel. Benefits – Hydromechanical Engineer Outstanding Pension Contribution PlanCompany Bonus SchemeIncome protection and life assurance (3x basic salary).Share purchase program.Early finish on Fridays.Flexible working hours.25 days annual leave plus public holidays.Employee Assistance Program for health and well-being support.Structured career development opportunities.Employee discounts on a wide range of products and services.Employee referral program. For more information on this role, please contact Ben Dawson on 01453 829522 or send copy of your CV to [email protected] details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Position: Manual machinistType of role: permanentHours of work: Monday to Thursday 7:00 am to 3:00 pm and on Fridays 7:00 am to midday Salary: £40000 to £45000 per year + bonusLocation: RedditchWe are now seeking to recruit a manual machinist for a precision manufacturing business based in Redditch. The appropriate manual machinist would be responsible for manufacturing, repairing and assembling of complete fastener tooling kits to technical drawings and specifications.The responsibility of toolmaker: Operating conventual lathesSetting and operating of all Toolroom measuring equipment.To source and obtain parts and materials as required following the procedures of the procurement systemTo ensure the correct tools and equipment are available to carry out the tasks and repairsBe a proactive and flexible team member, training in other disciplines where required. Requirements of a toolmaker: Time served toolmaker or equivalent qualifications i.e., City and Guilds, NVQ level 3, HNC etc.Proven interpersonal and leadership abilities to proactively work with and professional people and to interact effectively with individuals and groups both internal and external to the company and at all organizational levels.Manual turning experienceMust be able to work to tight tolerances Benefits: 25 days holiday plus bank holidaysAviva Retirement Savings Plan. Contributions match pus 1% from the employer.Life Assurance is in place for all PENSION SCHEME MEMBERS for 6 X Basic Salary and 4 X Basic Salary for non-members.Fast Shop bonus (non-contractual) % of fast shop premiums paid out to all employees each monthPerformance Bonus (non-contractual) paid in March for previous years business performance. Long Service Awards from 5 years onwards.Free parking If you think this role might be of an interest, please contact Marta Kosno 01453 852 542 and forward your CV to [email protected] is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.